Flushing Oil Concentrate

$115.00$615.00 incl.GST

Designed to restore pristine cleanliness to the dirtiest of engines (diesel and petrol), Flushing Oil Concentrate
has saved many thousands of diesels from expensive rebuilds.

  • Removes engine sludge & hard carbon
  • Frees stuck piston rings
  • Reduces smoke, blowby & oil use
  • Restores compression
  • Prevents diesel oil going black straight after a change
  • Suitable for all engines, transmissions & diffs

Description

Remove engine oil sludge

Flushing Oil Concentrate will restore even the dirtiest petrol or diesel engines to pristine cleanliness, and it’s directly helped thousands of people avoid costly rebuilds.

Many engines that are well within serviceable amounts of wear, run as if they’re worn out! That’s because a perfectly good engine will suffer with poor performance, if the engine is dirty or contains harmful deposits. Flushing Oil Concentrate removes the grime and sludge from your engine, leaving it spotless and allowing it to run without all that damaging dirt. This results in significant performance improvements!

Flushing Oil Concentrate is THE real-life FIX for sludgy engines, and perking up performance in mid life & older engines. It restores FULL cleanliness to all lubricated parts of engines, transmissions & hydraulics.

Fix problems caused by engine oil sludge:

  • Dirty Black Oil
  • Blocked oil pick-up
  • Stuck piston rings
  • Engine Sludge
  • Engine compression loss
  • Power Loss
  • Oil use
  • Diesel Smoke
  • Rough Idle
  • Overheating
  • Engine start problems
  • Engine Blow by

It leaves all lubricated parts of engines, transmissions and hydraulics in spotless condition.

  • Removes sludge & hard carbon.
  • Frees sticking piston rings.
  • Cuts smoke & Blowby.
  • Restores power & economy.

 

How to use Flushing Oil Concentrae

Dosage/Instructions: Dirty Engines: Step 1 Add Flushing Oil Concentrate to clean engine oil at eht rate of  12.5ml per litre of oil. Step 2 Engine to operating temp and run at fast idle for 30 - 45 Mins. Step 3  Drain Oil. Replace filter and refill with clean oil. Step 4 Replace filter and refill with clean oil.

Routine Maintenance:

  • Bring engine to FULL operating temperature.
  • Add Flushing Oil Concentrateat rate of  2.5ml per litre of oil.
  • Run at high idle or drive for  30-60mins before oil change.
  • Continue with normal oil change.

Additional information

Weight N/A
Dimensions N/A
Size

1 Litre, 20 Litre, 200 Litre, 250 ml, 5 Litre, 500 ml

Go to Top